Here is a report that details the main points of my research so far:

Objectives:

1) Starting from a known working model of a Hieronymus machine, specifically of the Patented Atomic Analyzer type, to verify the operation of the device as claimed. I have pretty much passed this phase. Now rebuilding my machine.

2) With the known working model, individually test components in the machine to gather information on proper substitutions. Identify conductors, insulators, proper resistors, capacitors, inductors, etc.

3) Draw up plans, for building a modern equivalent of the Atomic Analyzer, for publication on CD / book. This would fund my over $1000 research expenses.

4) Analyze and draw up plans for his other devices for publication.

5) Design and build a traveling Science exhibit on Hieronymus and his machines. The content slant would be based on his 1949 awarded Patent.

6) Help others the instruction and use of the machines, on an ongoing basis.

The Machines of Hieronymus:

1) Atomic or Industrial (Chemical) Analyzer. An analysis machine optimized for material elemental determination. Ten official units were made from 1941 to 1951, at which time production stopped. Unknown number of additional modern ones were made on a very limited basis, mainly for experimental work until late1980’s. I have personally examined 2 of them in detail firsthand. Have located a third one. Two more were at Universities including MIT, in Laboratory configuration.

2) Medical Analyzer. A diagnosis and treatment machine for living systems. Machine is based on the Atomic Analyzer, without the prism. About two, quantity included in the Ten above. Was used to track the Apollo astronauts. You will need a copy of the “Eloptic (Medical) Directory” to operate this type of machine. I have 2 copies.

3) Anapathic Machine. Maybe 6 were made. No stick-pad. Fully automatic 5 minute treatment machine for health disorders. Can work with patient, or a “sample” of the patient (hair, signature, photograph with negative intact)

4) Homeopathic Preparator, imparts the energy into water for drinking

5) Cosmic Pipe, treats agricultural fields for vitality, pests, mineral enhancements, general health and growth.

6) Eloptic Beam Projector, transmits Eloptic healing energy of a sample or dial settings.

7) Specific Rate Generator, to heal patients on one specific rate / disorder

Note that phase of amplified signal is important in all the treatment machines. 3 stages, with coils wound the same direction, afford 3 inversions, so the energy is fed back inverted, as you want.

Conductors:

1) Metals

2) Red and Brown Bakelite

3) Capacitors

4) Graphite

5) Glass pyrex beakers.

6) Prisms, I have specific chemical lab analyses of Hieronymus prisms.

Insulators:

1) Black Bakelite Only, highest recommendations!

2) Dry wood

3) Thin plastic Saran wrap, polyethylene?, poly propylene?

4) Inductive air core RF choke coils, except by distributed capacitance. Note that the capacitors with plastic sheets between the plates won’t work.

5) Vinyl tape and insulation on wires

6) Silk cloth, cotton cloth

7) Epoxy glue?

Stick Reaction in the population:

1) 100% in children age 6 to Jr High

2) 80% to High School

3) 70% general adult population. Women can attain high levels typically

4) 0% of scientists and psychic mediums. Maybe they try to influence the machine either too little, or too much. Not all this data from Hieronymus

Amplifiers:

1) 6AU6 tubes specified in the 1956 Astounding Science Fiction article by John Campbell, Jr, do not work at all, says Hieronymus.

2) 6SJ7-GT is the best amplifier to use, but only about 70% of them will work for Eloptic Energy, even though they test good on a tester. The GT means glass tube type. The standard 6SJ7 type is metal can, and will never work! Don’t know why not. I have spares. Its for the final output stage before reaction plate.

3) 6C5 is another good tube to use. Unknown success rate. I have spares.

4) 9001 is a moderately good amplifying tube but with a 100% success rate! It is good for all 3 stages. I have 10 on order, and a genuine Hieronymus machine will come here for repair and analysis, using these tubes.

5) I have Hieronymus’ handwritten experimental notes detailing how to build the Atomic Analyzer and treatment machines using Solid State Transistors. He Never gave out this information, only the specifications on tube amplifiers. They are on your CD, under H1.jpg to H4.jpg in a schematic folder. We are most interested in making a working transistorized unit for modern components.

The stick reaction can be taught. Hieronymus had a 2-4 week training with every instrument he sold. I have heard that an adept can transfer this skill to a novice at the stick-plate by placing their hand on the novice’s shoulder. Avoid washing hands often with surgical soap, avoid bleach on hands which ruins effect for days, don’t coat the plate with floor wax. Can use talcum powder on plate to aid slip.

The use of a pendulum is a recommended alternative for those who can’t get the “stick” I am researching this right now. I can’t get a stick, but my “psychic” wife and her friend both got a stick reaction. Described as “squeaky clean” “jammin’” “tarry” etc.